China Good Quality Factory Directly Drive Gear Box Harmonic Ace Gearbox Reducer Classic Design Strain Wave Generator Harmonic Drive Gearbox Price planetary gearbox

Jan 13, 2023 | Uncategorized

Item Description

Item Description:

one.Flexspline is a hollow flanging normal cylinder framework.

2.There is a large-diameter hollow shaft hole in the middle of the cam of the wave generator. The inner style of the reducer has a support bearing.

3.It has a completely sealed framework and is straightforward to put in. It is extremely suitable for the instances exactly where the wire demands to be threaded from the middle of the reducer.

Benefits:

The first:Higher precision,high torque

The second:dedicated technological staff can be on-the-go to offer layout answers

The 3rd:Factory immediate income good workmanship tough quality assurance

The fourth:Merchandise top quality problems have a one particular-year guarantee time, can be returned for substitution or mend

Business profile:

HangZhou CZPT Technology Co., Ltd. set up in 2014, is committed to the R & D plant of substantial-precision transmission factors. At present, the annual production capacity can reach 45000 sets of harmonic reducers. We firmly imagine in top quality initial. All links from raw supplies to finished items are strictly supervised and managed, which provides a solid basis for item quality. Our items are offered all more than the place and abroad.

The harmonic reducer and other large-precision transmission parts had been independently developed by the company. Our business spends 20% of its product sales every single year on the investigation and advancement of new systems in the sector. There are 5 folks in R & D.

Our edge is as under:

1.7 many years of advertising encounter

2. 5-man or woman R & D staff to supply you with technological assist

3. It is marketed at residence and overseas and exported to Turkey and Ireland

4. The product good quality is guaranteed with a one particular-calendar year guarantee

5. Merchandise can be customized

Toughness factory:

Our plant has an entire campus The amount of workshops is about three hundred No matter whether it truly is from the creation of uncooked resources and the procurement of raw materials to the inspection of completed items, we are doing it ourselves. There is a total creation method

HST-III Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at commence quit		The allowable highest of the regular load torque		Maximum torque is allowed in an instantaneous		Allow the maximum speed to be entered	Regular enter pace is permitted	Back again hole	layout existence
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	.six	20.seven	two.one	7.9	.seven	40.three	4.one	7000	3000	≤30	10000
	80	9	.9	27	two.seven	12.seven	1.three	fifty four.1	5.five
	a hundred	9	.nine	32	3.3	twelve.7	1.3	sixty two.one	six.three
17	50	eighteen.four	1.nine	39	four	29.9	three	80.five	8.2	6500	3000	≤30	15000
	eighty	25.3	two.6	forty nine.five	5	31	three.2	one hundred.1	ten.2
	100	27.6	2.eight	62	six.three	45	four.six	124.two	twelve.7
20	fifty	28.eight	2.nine	64.four	6.6	39	four	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.eight	54	five.five	146.1	14.nine
	100	46	four.7	ninety four.three	nine.6	fifty six	5.8	169.1	17.two
	a hundred and twenty	46	4.seven	100	10.two	fifty six	five.eight	169.one	seventeen.2
	one hundred sixty	forty six	four.7	one hundred	ten.2	fifty six	5.eight	169.1	17.2
25	50	forty four.9	4.6	113	eleven.5	sixty three	six.5	213.9	21.8	4800	3000	≤30	15000
	eighty	72.five	7.4	158	16.one	a hundred	10.two	293.three	29.9
	one hundred	seventy seven.1	7.nine	181	eighteen.four	124	twelve.seven	326.6	33.three
	120	seventy seven.one	seven.nine	192	19.six	124	12.7	349.six	35.six
32	50	87.4	8.9	248	25.three	124	12.7	439	forty four.8	4000	3000	≤30	15000
	80	one hundred thirty five.7	13.8	350	35.six	192	19.six	653	66.six
	one hundred	157.six	16.1	383	39.1	248	25.three	744	seventy five.9
40	100	308	37.2	660	sixty seven	432	44	1232	126.seven	4000	3000	≤30	15000

HSG Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at start end		The allowable maximum of the typical load torque		Maximum torque is permitted in an instant		Let the optimum speed to be entered	Regular input pace is authorized	Again gap	design and style life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	.seven	23	two.three	9	.9	forty six	four.seven	14000	8500	≤20	15000
	eighty	ten	one	30	3.1	14	one.four	61	six.two
	100	ten	one	36	3.7	fourteen	1.4	70	7.two
17	fifty	21	two.1	forty four	4.five	34	3.four	ninety one	nine	10000	7300	≤20	20000
	eighty	29	2.nine	56	five.7	35	three.six	113	12
	one hundred	31	three.2	70	seven.2	51	5.two	143	fifteen
20	fifty	33	3.three	73	seven.4	forty four	4.5	127	thirteen	10000	6500	≤20	20000
	eighty	forty four	four.5	ninety six	nine.eight	sixty one	six.2	a hundred sixty five	seventeen
	one hundred	52	5.three	107	10.nine	64	six.5	191	20
	one hundred twenty	fifty two	5.3	113	eleven.five	64	6.five	191	twenty
	a hundred and sixty	fifty two	5.three	120	12.2	sixty four	six.5	191	20
25	50	51	five.two	127	13	seventy two	7.3	242	twenty five	7500	5600	≤20	20000
	eighty	82	8.four	178	18	113	twelve	332	34
	100	87	eight.nine	204	21	a hundred and forty	14	369	38
	a hundred and twenty	87	eight.nine	217	22	a hundred and forty	fourteen	395	40
32	50	99	ten	281	29	140	fourteen	497	fifty one	7000	4800	≤20	20000
	80	153	16	395	forty	217	22	738	75
	one hundred	178	18	433	forty four	281	29	841	86
40	a hundred	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

Exhibition:
Application circumstance:

FQA:
Q: What need to I supply when I pick gearbox/velocity reducer?
A: The best way is to offer the motor drawing with parameter. Our engineer will check and advise the most suitable gearbox product for your refer.
Or you can also give under specification as nicely:
one) Variety, model and torque.
two) Ratio or output speed
three) Operating condition and link method
4) High quality and put in device identify
5) Input method and enter pace
6) Motor model design or flange and motor shaft dimension

US $238.1
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery, Hst-IV
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

US $238.1
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery, Hst-IV
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

editor by czh 2023-01-14