We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
2.1 Naming and nameplate identification
2.1.1 Naming rule
SI300-015G-4
| Identification | Voltage level |
| 4 | three-phase 380V |
| S2 | Single-phase 220V |
| Identification | Adaptive motor type |
| G | General type |
| Identification | 0.4 | 0.75 | … | 400 |
| Adaptive motor(KW) | 0.4 | 0.75 | … | 400 |
2.2 Introduction of various parts of the converter
The structure types of JAC580N series converter are the plastic and metal. The external diagram is shown below.
2.3 Basic technical specification
Table 2-1 Technical specification of 580N series frequency converter
| Item | Specification | ||
| Standard functions | Maximum frequency | Vector control: 0~500Hz; V/F control: 0~500Hz | |
| Carrier frequency | 0.8kHz~12kHz The carrier frequency is automatically adjusted based on the load features. |
||
| Input frequency resolution |
Digital setting: 0.01Hz Analog setting: maximum frequency x 0.571% |
||
| Control mode | • Open-loop vector control (SVC) • Closed-loop vector control (FVC) • Voltage/Frequency (V/F) control |
||
| Starting torque | • G type: 0.5 Hz/150% (SVC); 0 Hz/180% (FVC) • P type: 0.5 Hz/100% |
||
|
Basic functions |
Speed range | 1:100 (SVC) | 1:1000 (FVC) |
| Constant-speed accuracy | ± 0.5% (SVC) | ± 0.02% (FVC) | |
| Overload capacity | • G type:60s for 150% of the rated current • P type: 60s for 120% of the rated current. |
||
| Torque boost | • Fixed boost • Customized boost 0.1%-30.0% |
||
| V/F curve | • Straight-line V/F curve • Multi-point V/F curve •N-power V/F curve (1.2-power, 1.4-power, 1.6-power, ,1.8-power, square) |
||
| V/F separation | Two types: complete separation; half separation | ||
| Acceleration /deceleration curve | • Straight-line ramp • S-curve ramp Four groups of acceleration/deceleration time with the range of 0.0-6500.0s |
||
| DC bra ept | DC bra ept frequency: 0.00Hz~maximum frequency Bra ept time: 0.0s~36.0s Bra ept action current value: 0.0%-100.0% |
||
| JOG control | JOG frequency range: 0.00-50.00 Hz JOG acceleration/deceleration time: 0.0-6500.0s |
||
| Operation | Command source | Operation panel, control terminal and serial communication port are given Switch in various methods |
|
| Frequency source | Various frequency sources: digital reference, analog voltage reference, analog current reference, pulse reference and serial port reference. The switching can be conducted in various methods | ||
| Auxiliary frequency source | 10 kinds of auxiliary frequency source. The auxiliary frequency jog and frequency synthesis can be achieved flexibly | ||
| Input terminal | Standards: 7 digital input terminals, among which one support maximum high-speed pulse input of 100kHz 2 analog input terminals, among which one only supports voltage input of 0 ~10V and the other supports voltage input of 0 ~10V or current input of 4 ~20mA Expansion capability: 3 digital input terminals 1 analog input terminal, which supports voltage input of -10V ~10V and supports PT100/PT1000 |
||
| Output terminal | Standards: 1 high-speed pulse output terminal (The open collector type is optional), supporting 0~100kHz square signal output 1 digital output terminal 1 relay output terminal 1 analog output terminal, supporting current output of 0~20mA or voltage output of 0~10V Expansion capability: 1 digital output terminal 1 relay output terminal 1 analog output terminal, supporting current output of 0~20mA or voltage output of 0~10V |
||
| Display and keyboard operation | LED display | Display the parameter | |
| Key lock and function selection | Realize partial or all key lock and define the action range of some keys to prevent misoperation | ||
| Protection function | Short circuit test of electrified motor, input/output default phase protection, overcurrent protection, overvoltage protection, undervoltage protection, overheat protection, overload protection, etc. | ||
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
