We – EPG Team the greatest worm gearbox, couplings and gears manufacturing unit in China with 5 various branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /
UMC® is the ept leader in gearbox engineering. Over our 40 yr history we have introduced many ept modifying gearboxes this sort of as the patented TNT gearbox, the 740, the 760, the 775 and a lot more. We keep on to determine and redefine ept standards for gearbox efficiency, good quality, characteristics and technological innovation. Our gearboxes are objective built to do the task. By no means more than-engineered.
UMC® stands powering its items and is fully commited to manufacturing the very best items for a international market place.
740-U fifty:1 Ratio
Made for longer spans, greater wheels, and heavier towers.
Characteristics and Rewards
- 2.25 inch output shaft
- 50:1 equipment ratio
- Cartridge enter and output seals
- More substantial input bearings
- Input shaft guard
- External seal protectors for enter and output seals
- Top oil fill plug
- Universal mounting sample
- Complete cycle growth chamber with stainless metal cover
- Loaded with extreme pressure worm gear oil
- Steel output shaft and enter shaft
- Tapered roller bearings
- Involves carriage bolts and nuts
- Twin finished enter shaft
740-UV fifty two:one Ratio
Designed for for a longer time spans, larger wheels and heavier towers the place an prolonged output shaft is required.
This gearbox has all the identical abilities, characteristics and positive aspects that the regular 740 has with a few tweaks. The output shaft is prolonged, the equipment ratio is fifty two:one and the enter shaft is made of ductile iron with a 25° stress angle allowing this gearbox to be utilised on center pivot and lateral go/ linear methods that arrive common with these requirements.
Characteristics and Positive aspects
- 2.25 inch extended output shaft
- 52:1 gear ratio with 25° force angle
- Cartridge enter and output seals
- Bigger enter bearings
- Enter shaft guard
- Exterior seal protectors for input and output seals
- Top oil fill plug
- Common mounting pattern
- Total cycle expansion chamber with stainless steel cover
- Stuffed with extreme force worm gear oil
- Metal output shaft and ductile iron input shaft
- Tapered roller bearings
- Involves carriage bolts and nuts
- Twin finished enter shaft
760-UV Gearbox
Developed for corner systems and lateral transfer carts exactly where an prolonged output shaft is essential
Growers normally use UMC’s 760-UV gearbox for the most extreme programs exactly where an extended output shaft is necessary. The gearbox is created for increased once-a-year hrs of operation even though managing the hefty masses experienced on corner systems and lateral move carts as nicely as the most intense discipline circumstances in which wheel rutting is well known, soil is hefty, and tower weights are larger.
The UMC® 760-UV closing push gearbox is our largest and most tough gearbox with an extended output shaft. It features a bigger-diameter bull gear than the normal 740 collection to manage twenty% larger torque. It also attributes a two.5″ output shaft to accommodate a lot more overhung load. It is developed for use on middle pivots, corners, lateral go/ linear irrigation techniques and carts the place a fifty two:1 gear ratio and prolonged output shaft are normal requirements.
Attributes and Rewards
- two.5″ output shaft
- 52:one equipment ratio with a 25° stress angle
- Unique dual input and output seal layout
- 20% much more torque ability than the normal 740
- Bronze equipment optional
- Larger input bearings
- Input shaft guard
- External seal protectors for input and output seals
- eleven-Bolt mounting pattern
- Complete cycle expansion chamber with aluminum include
- Filled with extreme stress worm equipment oil
- Steel output shaft and ductile iron enter shaft
- Tapered roller bearings
- Consists of carriage bolts and nuts
- Twin finished input shaft
TNT-two Gearbox
Created for applications the place the irrigation system could require to be towed
This gearbox is the best answer for a towable irrigation system. Growers normally prefer this gearbox in excess of a gearbox with a towable hub. Just disengage the worm and tow your technique to its wor ept area, then re-engage the worm and you are all set to run. The CX coupler is the excellent compliment for the TNT-two gearbox because of to the potential to control coupler disengagement at the gearbox.
The UMC® patented TNT-two final push gearbox is designed exclusively for applications in which a middle pivot or lateral move/ linear irrigation system requirements to be towed. The gearbox gives the capacity to disengage the worm gear and allows end users to shift programs from a single location to an additional with out necessitating a Towable Hub add on.
Characteristics and Benefits
- 2.25″ output shaft
- fifty:1 equipment ratio
- Twin enter seals with triple lip output seals
- Bronze gear optional
- Input shaft guard
- Exterior seal protectors for enter and output seals
- Prime oil fill plug
- 11-Bolt mounting sample
- Complete cycle enlargement chamber with stainless steel cover
- Filled with excessive strain worm equipment oil
- Metal output shaft and enter shaft
- Tapered roller bearings
- Involves carriage bolts and nuts
- Twin ended input shaft
760-UV Bronze Gearbox
Created for the most extreme circumstances where an prolonged output shaft is essential.
Growers typically use The UMC® 760-UV bronze gearbox for the most severe purposes in which an prolonged output shaft is needed. The gearbox is designed for larger once-a-year several hours of operation while handling the hefty loads experienced on corner techniques and lateral shift carts as effectively as the most extreme subject problems where wheel rutting is well known, soil is hefty, and tower weights are increased.
The UMC® 760-UV Bronze ultimate drive gearbox is our premier and most sturdy gearbox with an extended output shaft created for the most excessive growing conditions. It features a substantial power aluminum bronze bull gear and a heat treated steel worm equipment giving it a considerably increased load potential than the regular 760-UV. Additionally, this gear blend tremendously decreases equipment wear, extending the useful life of the gearbox. It also attributes a two.5″ output shaft to accommodate far more overhung load. It is developed for use on heart pivots, corners, lateral move/ linear irrigation systems and carts where a 52:one gear ratio and extended output shaft are normal specs.
Characteristics and Positive aspects
- 2.5″ output shaft
- 52:1 gear ratio with a 25° force angle
- Unique dual enter and output seal design and style
- Bronze Equipment
- Warmth Dealt with Metal Worm Equipment
- Greater enter bearings
- Input shaft guard
- External seal protectors for enter and output seals
- 11-Bolt mounting sample
- Full cycle expansion chamber with aluminum include
- Stuffed with severe strain worm gear oil
- Steel output shaft
- Tapered roller bearings
- Involves carriage bolts and nuts
- Dual ended enter shaft
- Also Offered Assembled in the United states of america
ept is the ept chief in gearbox technology. More than 37 12 months history they have launched numerous ept shifting gearboxes such as the patented TNT gearbox, the 740, the 760, the 775 and a lot more. ept keep on to outline and redefine ept expectations for gearbox functionality, high quality, functions and technology. ept gearboxes are purpose constructed to do the occupation. Never ever more than-engineered. ept stands driving its products and is fully commited to producing the very best products for a international industry.
/ The use of authentic equipment manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our organization and the listed alternative components contained herein are not sponsored, accredited, or manufactured by the OEM. /
