We – EPG Group the most significant worm gearbox, couplings and gears manufacturing unit in China with 5 various branches. For much more information: Cellular/whatsapp/telegram/Kakao us at: 0086-thirteen 0571 0571 28 /
I. Summary
ZSY sequence is a type of difficult tooth gearbox made according to JB/T8853-2001. Its shafts are assembled parallel. They are widely employed in mining, metallurgy, lifting, transportation, cement, building, portray, pharmaceutical industries, textile, chemical market.
II. Features
1,The gears are all made of substantial quality lower carbon alloy steel by normalizing and carburizing. The hardness of the gears reaches HRC58-62. The gears are all grinded with high precision and good get in touch with.
2,High transmission performance: one stage’s effectiveness is a lot more than 96.5%, double stage’s a lot more than 93%, a few stage’s much more than 90%
three,This series reduction gearbox has small measurement, gentle excess weight, large bearing ability, longer existence.
four,Large stability, steady procedure, low noise.
five,The primary parameters, such as heart distance and transmission ratio, have been optimized, and the major parts have good interchangeability, straightforward disassembly and installation.
six,Usually, oil pool lubrication and all-natural cooling are employed. When the thermal electrical power is inadequate, circulating oil lubrication or fan and cooling plate can be used for cooling.
III. Conditions when using
1. Enter pace of large speed shaft of reducer is not far more than 1500r / min
two. The peripheral pace of reducer’s equipment shall not be a lot more than twenty m / s.
three.The wor ept setting temperature of the reducer is – forty ~ + 50 ºC. When the temperature is reduce than ºC, the lubricating oil need to have to be preheated to previously mentioned ºC before beginning.
4. The reducer can operate in the two constructive and negative instructions.
VI.Versions
ZSY one phase:160,one hundred eighty,200,224,250,280, 0571 , 0571 ,four hundred,450,500,560,630, 0571 .
/ The use of first tools manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our business and the shown replacement elements contained herein are not sponsored, approved, or made by the OEM. /
